Hansen Tank Valve: High-Flow & Cost-Effective Solution

Name: Hansen Fast-Flo Trough / Tank Valve Short Arm Pack
SKU: HFFSAV
Availability: InStock

Details	Code	Price	Quantity
15mm Long Tail Adaptor – Fast Flo Short Arm Pack	HFFSV15LS	$25.82 incl GST	Hansen Fast-Flo Trough / Tank Valve Short Arm Pack quantity
20mm Long Tail Adaptor – Fast Flo Short Arm Pack	HFFSV20LS	$25.82 incl GST	Hansen Fast-Flo Trough / Tank Valve Short Arm Pack quantity
25mm Long Tail Adaptor – Fast Flo Short Arm Pack	HFFSV25LS	$25.82 incl GST	Hansen Fast-Flo Trough / Tank Valve Short Arm Pack quantity

Features

Each valve is supplied with: Complete Plastic Valve Body, Brass Arm & Long Tail Adaptors
performance, cost effective trough/tank valve - 29 psi, 34 l/min
Fast~Flo Short Arm Valve has the highest flow of any valve of its size at 500 kPa (73 psi) it will deliver 56 l/min
Ability to attach a diffuser hose to reduce water turbulence & noise in top entry installations & Anti-Syphon Holes to prevent back flow
Designed with an Ezi Bend brass arm to make water level adjustment a breeze
Will fit multiple thread & connection combinations 15 - 50mm
Reliable with high and low pressure applications from 0.2 - 12 bar
Durable urethane seat, which is reversible
Suitable for top or side entry
Manufactured from strong non corrosive UV stabilised materials

Overview

The Hansen Fast Flo Valve is ideally suited to tight fitting environments that demand a more compact sized valve with responsive on / off capabilities, exceptional flow rates and adaptability. The Fast Flo allows a hose attachment to both diffuse and help eliminate noise from the outlet flow and has a tough, reversible, urethane seat which effectively doubles the life of the valve providing a 'best of class' valve that's reliable for the long term.

Trough / Tank Installation:

Flush pipelines into a water tank or troughs before installing Fast~Flo Valve into
new system
Isolate the water going to the trough or tank to replace a valve in an existing system.
Thread O-Ring end of correct size Long Tail Adaptor into Fast~Flo Valve Body and tighten firmly enough that the O-Ring creates a seal against the Fast~Flo Valve Body face. Do not overtighten.

TO CHANGE WATER LEVEL

Adjust the length of cord at top of float. Use the nut & cord on the long arm valve only.

Side Entry Trough/Tank:

Place the ribbed side of the Rubber (soft) Washer against the hole inside the trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the trough/tank wall.
On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not overtighten.
Screw the Cord Nut* onto the Fast~Flo Brass arm.
Thread the Cord* through the Fast~Flo Float. Tie the Cord off to achieve the correct water level.

*Cord and Nuts only supplied with long arm version.

NOTE: If there is an existing or moulded threaded inlet in the trough or tank use a Hansen Standard Adaptor.

Top Entry Trough/Tank

Place the ribbed side of the Rubber (soft) Washer against the hole inside the trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the trough/tank wall.
On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not overtighten.
Screw the Fast~Flo Float on to the Brass Arm, do not bend Brass Arm

Hansen Floats – Blue
Price range: $6.25 through $12.45 Select options This product has multiple variants. The options may be chosen on the product page
Hansen Hex Nipple
Price range: $1.09 through $27.35 Select options This product has multiple variants. The options may be chosen on the product page
Hansen High Visibility Floats
Price range: $7.87 through $9.30 Select options This product has multiple variants. The options may be chosen on the product page
Hansen Male Hose Tail
Price range: $1.54 through $25.17 Select options This product has multiple variants. The options may be chosen on the product page
Hansen Male Straight Coupling
Price range: $2.39 through $19.93 Select options This product has multiple variants. The options may be chosen on the product page
Hansen Metric Male Threaded Coupling
Price range: $4.61 through $136.42 Select options This product has multiple variants. The options may be chosen on the product page
PVC Valve Socket
Price range: $0.58 through $14.30 Select options This product has multiple variants. The options may be chosen on the product page

Hansen Fast Flo Trough Brochure

Hansen Fast Flo Info Sheet

Hansen Fast Flo Trough Assembly Guide

How to:

Trough / Tank Installation:

Flush pipe lines into water tank or troughs before installing Fast~Flo Valve into new system
Isolate the water going to the trough or tank to replace valve in an existing system.
Thread O-Ring end of correct size Long Tail Adaptor into Fast~Flo Valve Body and tighten firmly enough that the O-Ring creates a seal against the Fast~Flo Valve Body face. Do not over tighten.

Side Entry Trough/Tank:

To Change Water Level Adjust length of cord at top of float. Use the nut & cord on the long arm valve only.

Place the ribbed side of the Rubber (soft) Washer against the hole inside the trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the trough/tank wall.
On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not over tighten.
Screw the Cord Nut* onto the Fast~Flo Brass arm.
Thread the Cord* through the Fast~Flo Float. Tie the Cord off to achieve the correct water level.

Top Entry Trough/Tank:

Note: If there is an existing or moulded threaded inlet in the trough or tank use a Hansen Standard Adaptor.

Place the ribbed side of the Rubber (soft) Washer against the hole inside the trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the trough/tank wall.
On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not over tighten.
Screw the Fast~Flo Float on to the Brass Arm, do not bend Brass Arm