Poly Pipe Guide
The different types of Polyethylene Pipe in the market cause headaches for many people trying to figure out what pipe they need, or already have on their property and matching this up with the fittings they need.
Simple Explanation:
It’s a long story but to make it short, LDPE is only made in NZ and Australia. Its measurement is based on the internal size of the pipe, MDPE is made worldwide and is measured on the external diameter of the pipe. Horticultural Lateral Tube is used for connection of sprinklers and drippers. These pipes use different fittings, click on the links below to see what the fittings look like
Other Poly Pipe Guides
Major Pipe Brands
Low Density
- Iplex - Novathene
- RX Plastics - LDPE
- Marley - Enduro Flex, 950 Series
- Rural Direct - LDPE
- Waters and Farr - Imperial LDPE
Fittings to Use
- Hansen
- Anka
- RX LDPE
Medium Density
- Iplex - Greenline, Redline, Blueline, Blackline, Rural Black, Effluent
- RX Plastics - MDOD, MDID (MDID pipe uses LDPE fittings)
- Marley - Oasis
- Asmuss Water Systems
- Waters and Farr
Fittings to Use
- Plasson
- Hansen Compression
- Philmac
- RX Compression
- Jimten Gamma
- RX
- Metric
- Irritec
(numerous other manufacturers).
Lateral
- Iplex - Novatube (5bar)
- RX Plastics - Hort Lat Tube (3bar), Horticultural Lateral Tube (5bar)
- Wetta - Lateral (3bar)
- Rural Direct - Lateral (3bar)
- Waters and Farr - Hi Pol
Fittings to use
- Antelco
- Wingfield
- RX
Pipe Measurements
There will be slight variations between manufacturers in these measurements. These measurement are based off the RX Pipe Guide
If you find you need to measure pipe regularly use the Hansen pipe measuring tool.
